Pressure Control Equipment

Crossover Adapters primarily for connecting wireline PCE to wellheads, or for connecting a flanged component within a string of PCE

Eliminates sharp edges when entering the PCE string with a wireline conveyed tool string

Hunting Quick Union Lifting Caps offer a safe and convenient method of lifting Pressure Control Equipment such as wireline valves, riser sections, etc.

Hunting Quick Union Lift Caps offer a means of lifting a piece of equipment and also, of pressure testing it. This can save a great deal of time and expense as a lot of lifting is carried out during testing operations.

Fit into a Quick Union Box and can be used for pressure testing of pressure control equipment

The Inverted Ezi-Latch Control Unit is a custom build design to control and function the Inverted Ezi-Latch

Quickly connects the Pressure Control Tool String or Night Cap to the Wellhead.

The Ezi-Latch Transport Frame is the best way to store and protect equipment for Ezi-Latch operations

The Inverted Ezi-Latch is designed to quickly connect the Pressure Control Tool String or Night Cap to the Wellhead.

Ezi-Latch Stinger Crossovers are used to connect Hunting’s Ezi-Latch products to the PCE string.

The system centralizes and streamlines deployment and control of a modern pressure control rig-up.

Aiding the injection of inhibitor chemicals and de-icing agents onto the wireline or into the wellbore during routine operations

Positioned on top of the lubricator rig up, the Grease Injection Control Head is designed to contain well pressure whilst running braided cable into or out of the well.

Hunting grease injection control heads are designed to contain well pressure whilst running braided line or electric line cable operations.

The Hunting Hydraulic Grease Head Cable Cutter is an accessory that fits beneath the bottom flow tube of a Grease Injection Control Head.

Hunting lubricator and riser sections are designed to act as chambers for deploying wireline tools into the well whilst under pressure.

Hunting manufactures and supplies a wide range of Lifting Clamps and Spreader Bars, suitable for lifting lubricators and Pressure Control Equipment in a safe and controlled manner.

Hunting’s Riser Lock clamps are designed to adapt above the quick union collar of lubricator joint or similar piece of pressure control equipment (PCE) quickly and easily.

The Hunting Test Fixture is designed to offer a safe and convenient method of conducting a load or pull testing and can adapt to a large variety of Hunting products.

The Hunting Ball Valve is a fully opening hydraulically controlled valve, designed to hold pressure from above and below.

The Hunting DSL Debris Wiper is supplied with quick unions on top and at the base as a standalone assembly placed directly below the Pack Off Antenna Sub and above the lubricator.

Hunting Hay Pulleys are designed and manufactured to withstand the increased loads that the new generation of slicklines can impart, as well as the wear and tear of life at the rig site

When fitted to the top of a Grease Injection Control Head, the purpose of a Hunting Line Wiper is to remove excess grease from braided cable when retrieving tools from the well.

The Hunting Hydraulic Pack Off is a simple, reliable means of sealing on a cable during very low pressure open hole operations.

Takes the place of the bottom connection, effectively becoming the joint that has been broken

Seals around greaseless wireline using hydraulic pressure

Seals around greaseless wireline using hydraulic pressure

Pump-In Sub are designed to provide a large flow fluid entry path into the pressure control equipment for hydrostatic testing or for pumping fluid into the well.

Hunting Quick Union Rig-Up Dollies are designed to allow wireline crews to safely bring a lubricator section from the horizontal position to the vertical and then back again.

Reduces operators rig up height during E-line operations, by turning the wire through 180 degrees whilst still within the Pressure Control Equipment

The Hunting 15K Ezi-Load Liquid Seal Stuffing Box uses industry proven design elements from the successful Ezi-Load stuffing box in a 15K option.

Hunting’s revolutionary EziLoad® Stuffing Box was designed to overcome the manual handling problems caused by the increasing weight and awkwardness of conventional Slickline Stuffing Boxes.

The Hydraulic Slickline Stuffing box serves two purposes; guiding the slickline from the bottom hay pulley into the top of the lubricator rigup and containing well pressure whilst the slickline is either moving or stationary.

The Hunting Liquid Seal is used in conjunction with a conventional Hydraulic Slickline Stuffing Box, to give the primary seal on a slickline, maintaining pressure integrity when running into and out of the well.

The Hunting EziCatch Tool Catcher has been designed for use in conjunction with the EziLoad Slickline Stuffing Box.

Hunting’s EziCombo® combines the revolutionary EziLoad Stuffing Box with the equally revolutionary EziCatch Tool Catcher.

The Hunting Open Hole Tool Catcher has been developed to eliminate the possibility of a dropped tool string during wireline open hole operations.

Hydraulic Tool Traps are a safety device. Essentially a flapper type valve for tools, they are positioned just above the WLV and can be opened to allow tools to pass into the well.

The Hunting Ezi-Close system offers the operator significant safety advantages in the case of an emergency during slickline, braided line and e-line operations.

Hunting wireline WLVs (wireline valves) are positioned on top of the wellhead, at the base of the lubricator rig up. They are a safety device, to be used in the event of problems when running wireline into a well.

The Hunting Lightweight Wireline Valve is designed to offer improved handling, ease of serviceability and with fewer parts.

A simple equalising system that allows equalisation across individual sets of rams, with a basic injection port - this type is rugged, easy to use and entirely effective.

Hunting’s Compact Hydraulic WLVs can be supplied with virtually any type of Ram Configuration to suit any application.

The heavy duty steel frame protects the WLV and allows for easy movement, either by fork-lift truck or crane.

Hunting's ESSV - HD continues to lead the industry with the new generation for well intervention shear seal solutions

The Hunting AutoLock provides a safeguard against valve damage by automatically locking the hydraulic supply to the actuators when differential pressure is detected across the flapper when opening the valve.

Hunting is revolutionising well intervention operations with the introduction of an innovative and universal “shear and seal” valve which delivers improved operational safety, reliability and well integrity.

Hunting’s Coiled Tubing BOP provides wellbore isolation, protection against blow-outs and secures the well in an emergency.

Hunting offers a Corrosion Inhibitor Fluid Injection Sub for Coiled Tubing Pressure Control Equipment (PCE) systems.

Takes the place of the bottom connection, effectively becoming the tool change joint that has to be broken

Seals around coiled tubing as it is stripped in and out of the well bore