Heat Exchanger (Container Type)
A skid-mounted steam vessel containing a high pressure coil and choke to divert the well stream upstream of the separator
The Heat Exchanger Container Type is a skid-mounted steam vessel which contains a high pressure coil and choke through which the well stream can be diverted upstream of the separator.
The Container is designed to be shipped and handled like a standard 20 ft shipping container lowering the cost of transportation.
A separate steam generator supplies a constant flow of steam in contact with the coil to raise the temperature of the well effluent to prevent hydrate formation from plugging or restricting the flow and to improve separation and burner efficiency by reducing fluid viscosity and breaking down emulsions.
Hunting provides a customised design, taking account of thermal design features, high/low pressure limits, temperature range, product mix and fluid flow capacity. Hunting’s manufacturing flexibility enables them to supply heat exchangers for a variety of volume requirements.
The temperature of the well effluent downstream of the heat exchanger is monitored through a control-valve which then varies the steam flow into the vessel to maintain a pre-set temperature.
Internal tubing coil for effluent flow inside pressurised steam outer shell
Automatic temperature control
Choke between inlet and outlet to allow preheating of effluent
Bypass manifold to avoid erosion in coils during well clean-up
Steam trap with steam condensate outlet
Glass-wool insulation on outer shell with aluminium jacket
Spares toolbox mounted in skid
Improved separation efficiency through viscosity reduction and breaking emulsions
Avoiding flow restriction from gas hydrate formation
Enabling well test operations where indirect-fired heaters are not permitted
Packaged in industry standard 20 ft shipping container skid.